Dear user,
Thank you for choosing the Snug Smart Camera. The following guide will tell you how to operate the camera and its functions. Should you have any trouble or if you need assistance please contact us at:
support@snugtogether.com

Online Monitoring
In device list if you see it as “On line” tap the camera to enter the main viewing screen. You will see icons you can tap at the top and bottom of the screen.
At the top are pan cruise, tilt cruise, pan mirror image and tilt mirror image. These buttons will move the camera automatically without the need to swipe the screen.

From left to right on the bottom are monitor and talkback, snapshot, video recording (SD card needs to be inserted), resolution, preset position, contrast, brightness, video settings, and Infrared setting for night vision.

Controls
To control the camera swipe your finger up, down, left or right to move the camera. If there is a delay in the image moving on your screen, this lag is due to the speed of the wifi and/ or the 3G signal if you are using your phone. If you try repeatedly swiping then you may have gone too far when the image catches up.

Click the monitor button to hear audio

If you want to talk through the camera using the two way microphone hold the microphone button down while you speak.

Alarm Settings

Click to enter settings when on the device list screen.

Access the alarm settings. Here you can turn motion detection on or off and set it from high sensitivity (1) right down to the lowest sensitivity (10). You can also turn audio detection on or off and set it to high, medium or low.
To turn motion detection or audio detection on tap the button to the right of the feature you want to activate so the button turns green.